Particle-image velocimetry measurements of separation and re-attachment of airflow over two-dimensional hills with various slope angles and approach-flow characteristics
- 著者
- Kanda I., Yamao Y., Uehara K., Wakamatsu S.
- 雑誌名
- Boundary-Layer Meteorology, 148:157-175
- DOI
- 10.1007/s10546-013-9806-1
- 概要
- Airflow over two-dimensional hills was investigated in a wind tunnel using particle image velocimetry. We focus on the flow separation behaviour. A trapezoidal hill shape was used inmost of the experimental runs, but the critical slope angle for flow separation was approximately the same as that established for smooth hill shapes. The re-attachment point of the separated flow became farther from the hill as the slope angle θ increased, reaching a saturation of about seven times the hill height for θ ≳ 60°. Increasing the upwind surface roughness length was found to suppress flow separation. This tendency is analogous to the previous experimental results for turbulent boundary layers on flat plates. The boundary-layer thickness varied by the presence or absence of Counihan-type spires and a castellated fence at the test-section entrance had negligible effect on the flow separation.